JOMGateway.net

Grain Size Dependence of Austenite Decomposition in Air-Cooled 16MnCr5 Steel

High-Temperature Tensile Properties of Nano-Oxide Dispersion Strengthened Ferritic Steels Produced by Mechanical Alloying and Spark Plasma Sintering

Grain Refinement of an Extruded Mg Alloy via Na Microalloying

Three-Stage Homogenization of Al-Zn-Mg-Cu Alloys Containing Trace Zr

Secondary Coincidence Site Lattice Model for Truncated Triangular β-Mg2Sn Precipitates in a Mg-Sn-Based Alloy

Precipitate Size in the Superalloy IN738LC During Compression Creep

Phase Transformation Textures in Hot-Rolled Binary Ti-Nb Alloys

Role of Sulfur on the Transition from Graphite to Cementite Eutectic in Cast Iron

Effect of Niobium on the Ferrite Continuous-Cooling-Transformation (CCT) Curve of Ultrahigh-Thickness Cr-Mo Steel

Interfacial Free Energy of Cu-Co Solid Solutions

Anisotropic Diffusion Behavior of Al in Mg: Diffusion Couple Study Using Mg Single Crystal

Multicomponent Interstitial Diffusion in and Thermodynamic Characteristics of the Interstitial Solid Solution ε-Fe3(N,C)1+x: Nitriding and Nitrocarburizing of Pure α-Iron

Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel

Effects of Phosphorus and Carbon Contents on Amorphous Forming Ability in Fe-based Amorphous Alloys Used for Thermal Spray Coatings

Microstructure Evolution and Mechanical Properties of Al-1080 Processed by a Combination of Equal Channel Angular Pressing and High Pressure Torsion

The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary Alloy

Investigation of Portevin–Le Chatelier Effect in Al-2.5 pct Mg Alloy with Different Microstructure

Effects of Microstructure on Tensile, Charpy Impact, and Crack Tip Opening Displacement Properties of Two API X80 Pipeline Steels

An Atomistic-Based Hierarchical Multiscale Examination of Age Hardening in an Al-Cu Alloy

Larson–Miller Constant of Heat-Resistant Steel

An Investigation on the Fatigue Fracture of P/M Al-SiC Nanocomposites

Characterization of Joints Between Aluminum and Galvanized Steel Sheets

Morphology and Crystallography of Bainite Transformation in a Single Prior-Austenite Grain of Low-Carbon Steel

Galvanizing and Galvannealing Behavior of CMnSiCr Dual-Phase Steels

Morphology and Growth Kinetic Advantage of Quenched Twinned Dendrites in Al-Zn Alloys

Texture Evolution During Cross Rolling and Annealing of High-Purity Nickel

Influence of Metal Properties on the Formation and Evolution of Metal Coatings During Mechanical Coating

Effect of Icosahedral Quasicrystalline Fraction and Extrusion Ratio on Microstructure, Mechanical Properties, and Anisotropy of Mg-Zn-Gd-Based Alloys

Microstructure and Tensile Properties of Wrought Al Alloy 5052 Produced by Rheo-Squeeze Casting

Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part I. Evolution of Microstructure and Texture

Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part II. Mechanical Properties Anisotropy

Plastic Flow and Microstructure Evolution during Thermomechanical Processing of a PM Nickel-Base Superalloy

Spheroidization of Eutectic Silicon in Direct-Electrolytic Al-Si Alloy

Hydrogen Solubility in Pd/V2O5 Composites Formed by Internal Oxidization and Hydrogen Isotherms in Un-oxidized Pd-V Alloys

Deformation Behavior and Dynamic Recrystallization of Biomedical Co-Cr-W-Ni (L-605) Alloy

Effect of Natural Aging and Cold Working on Microstructures and Mechanical Properties of Al-4.6Cu-0.5Mg-0.5Ag alloy

Characterization of an Al-Y-Zn Intermetallic Particle Phase in Extruded Mg96−xAlxZn2Y1.9La0.1 Alloys

Age Hardening Behavior and Corresponding Microstructure of Dilute Al-Er-Zr Alloys

Effect of the Heat Treatment on the Cube Recrystallization Texture of Al-Mn-Mg Aluminum Alloy

High-Temperature Mechanical Behavior of Extruded Mg-Y-Zn Alloy Containing LPSO Phases

Evaluation of Microstructure and Mechanical Properties of Nano-Y2O3-Dispersed Ferritic Alloy Synthesized by Mechanical Alloying and Consolidated by High-Pressure Sintering

Prediction of the As-Cast Structure of Al-4.0 Wt Pct Cu Ingots